2-layer quality mattress combining pressure distribution and comfort.
Viscoelastic foam molds after the body and distributes the body’s weight over the entire lying surface to avoid high point pressures. Materials and construction increase flexibility and airflow.
Prevention and treatment of pressure ulcers in stages 1-3.
The mattress comes with an elastic incontinence foil, washable at 60°c.
Including anchor system to hold the mattress during rotation.
RotoBed®SafeSleep is manufactured without CFC and is CertiPur and OEKO-TEX® 100 certified.
Recommended user weight 40 – 140 kg
2-layer quality mattress with foam layers especially designed to distribute the body weight evenly to minimize horizontal shear and avoid pressure points.
High density foam provides a stable and pressure-absorbing base to prevent the user from “sinking” into the mattress.
Prevention and treatment of pressure ulcers in stages 1-3.
The mattress comes with an elastic incontinence foil, washable at 60°c.
Including anchor system to hold the mattress during rotation.
RotoBed®BariaSleep is manufactured without CFC and is CertiPur and OEKO-TEX® 100 certified.
Recommended user weight 100 kg – 190 kg
A hybrid mattress combining the pressure distribution properties of advanced foam mattresses with the periodic pressure relief as with alternating air mattresses.
In static function, RotoBed®AirSleep is a good pressuredistributing foam mattress with a high level of sleeping comfort. When the alternating function for periodic total relief of pressure against the skin is needed, just switch on the connected pump. When the alternating function is no longer needed, simply disconnect the pump, and the mattress again works as a comfortable pressure-distributing mattress.
The ability to switch between static and dynamic function limits expensive and time-consuming mattress changes. This makes the hybrid systems particularly suitable for use in patient’s homes, palliative care environments and hospital wards with patients at risk of pressure ulcers.
Protection and prevention of decubitus in all stages.
Very quiet alternating system with a 5-year warranty.
The mattress comes with an elastic incontinence foil, washable at 60°c.
Including anchor system to hold the mattress during rotation.
RotoBed®AirSleep is manufactured without CFC and is CertiPur and OEKO-TEX® 100 certified.
Recommended user weight without pump: 40 – 130 kg.
Recommended user weight with pump: 40 – 190 kg.
2-layer mattress with proven efficacy in the prevention and treatment of pressure ulcers in all four stages.
Optimal prevention and healing conditions for users at high risk of pressure ulcers.
The air cells in a ROHO® mattress are made from soft and flexible neoprene. The linked cells provide a large contact surface and a constant, low hydrostatic pressure on both the skin and the deeper tissues. This, and the low friction, allows the blood and lymphatic system in and under the skin to function unimpeded.
At the same time, skin temperature – thanks to the good air circulation – remains lower than with other mattress systems.
No use of electric pump. This makes transfers easier and saves user and staff of unpleasant noise, vibration and heat.
Including foot section in RotoBed®SafeSleep material and anchor system to hold the mattress during rotation.
The mattress comes with an elastic incontinence foil, washable at 60°c.
The RoHo® Dry Flotation is manufactured without CFC and is CertiPur and OEKO-TEX® 100 certified.
Recommended user weight up to 190 kg
Bedrails at backrest, short model.
Provide good support in connection with transfers in bed.
Bedrails at the middle of the bed (in chair position at seat), long model. Set.
Provide good support when getting in and out of bed.
Bedrails at backrest, short model, in oak veneer or stained black.
Provide good support in connection with transfers in bed.
Bedrails at the middle of the bed (in chair position at seat), long model in oak veneer or stained black. Set.
Provide good support when getting in and out of bed.
Upholstery for bedrails, covers both bedrails.
Material: Quality fabric from Danish Kvadrat, made of 51 % recycled plastic. Washable at 60°c.
Note: RotoBed®Upholstery only fits RotoBed®Bedrails of metal.
A slide sheet designed for people with difficulty turning over in bed. Can be used in combination with RotoBed®RotoSlide 2way in connection with transfers.
Sliding sheet facilitating sideways transfers in the bed. Slides in two directions. Use in combination with RotoBed®RotoSlide slide sheet.
Sliding and turning system with integrated locking function.
Specially adapted to RotoBed®.
Made of microfiber with thin polyester padding as well as the unique sliding material ULF (Ultra Low Friction). Comfortable to lie on thanks to the soft surface. Underneath the turnsheet lies the RotoTurn mattress cover which is smooth at the middle and non-slip on the edges. The mattress cover can be locked in sections to prevent the user from sliding downwards in the bed.
Pillow in thermos-elastic foam, width 80 cm.
Pillowcase for RotoBed®Pillow. Attachable at backrest. Holds the pillow during rotation.
100 % cotton, washable at 60° c.
In black or beige colour.
Sheet made of soft, strechable cotton.
Set consisting of sheet for both main mattress and foot-part
100 % cotton, washable at 60° c.
In black or beige colour.
Including handle with seat belt.
To be placed in the bed’s build-in holders, in either right or left side of the bed.
This elegant bedside table in oak veneer is true Danish Design by Hans Sandgren Jakobsen.
It has a diameter of 30 cm and an inner height of 5 cm, it is height adjustable and swivelling – and as it is designed exclusively for RotoBed®, you easily mount it in the bed’s build-in holders, either left or right.
The surface is a fusion of beauty and practicality. The highly innovative nano-laminate has a matte and silky soft surface on which it is almost impossible to deposit fingerprints.
At the same time, the surface has antibacterial properties, and micro-scratches can be removed with a melamine sponge.
Also available stained black.
Mattress cover made of souple and stretchable foil.
Semi-impermeable and washable at 95°c.
The upper part can be zipped off for washing.
One set of protection covers for main and foot mattress is always included in the purchase of a RotoBed®.
Elegant LED-lamp.
To be placed in the bed’s built-in holders, in either right or left side of the bed.
Two soft spotlights will turn on whenever the RotoBed® is rotated towards exit position. When the bed is rotated back, lights will go out. Underbed Light is mounted on the bed.
Lithium battery from LINAK.
Covers approx. 10 x cycle without power supply.
The wallspacers are easily mounted on the bed without tools and ensure the right distance between the bed and the wall.
This prevents damage to the motors caused by the bed being turned against the wall.
Harmonious design by Hans Sandgren Jakobsen.
Bed carrier for vertical transport and storage of bed.
Elevates the RotoBed® to vertical position with no physical exertion.
To be used in combination with RotoBed®Trolley.
CE-marked and approved by the Danish Technological Institute.
